Rubber Grommets Water Seal Hydroponics Dutch Bucket - Pack of 100

Description

Pack of 100 Rubber Grommets for making a water-tight seal
for use in hydroponic setups and Dutch bucket growing systems, among other applications.
These grommets make a water-tight seal with with low cost 1/2" PVC pipe (known as Schedule 40 PVC pipe) sold at virtually all hardware stores in the USA. At my local hardware stores (Home Depot and Lowes), a 10 foot run of this pipe costs just .98. Despite the label "1/2 inch" this pipe has outer diameter=0.840" and inner diameter of about 0.6".
To install the grommets, drill a 1 in hole in your bucket or other container with, for example, a hole saw, a 1" spade drill bit. Clean up any burr left over after drilling; I use sandpaper for this. Place the grommet in the 1" hole, then insert the PVC pipe. It will be easier to insert the 1/2" PVC pipe into the hole/grommet if you give the end of the pipe you will insert a little bit of a taper using a pocket knife or sandpaper. A little lubricant such as soap (or saliva) is also helpful.
I ship these using USPS First Class Package service which typically has delivery in 1-3 business days and includes package tracking.
More details on the grommets:
Style 1 Rubber Grommet, 3/4" I.D., 1-1/8" O.D., 3/32" Panel Thickness
Inside Dia. (A)3/4"
Outside Dia. (B)1-1/8"
Overall Thickness (C)5/16"
Panel Thickness (D)3/32"
Panel Hole Dia. (E)15/16"
Rubber Material Styrene Butadiene Rubber (SBR)
Rubber ColorBlack
Min. Temp. (F)-40
Max. Temp. (F) 225
Durometer 60A +/-5
Elongation 250%
Tensile Strength 870 psi
Standards ASTM D2000 2AA606