New HC-SR501 Infrared PIR Motion Sensor Module for Arduino Raspberry_U OH

Description

Description:
Description:
It is great for microcontrollers such as arduino for funduino and many more including the rasberry pi!
It is a HC--SR501 Sensor Module with an operating voltage of 5v to 20v.
Operating voltage. It has a high value of 3.3 volts and a low of 0 (it is either on or off). It's delay time can be adjusted from 5 to 200seconds as well as the sensing range from 3meter to 7meters. The entire sensor with the board is 32mm by 24mm (standard pir motion sensor). The sensor either gives off a 3.3volt high value when motion is detected and then resumes or continues to give off a 0 voltage when no motion is detected. If you use an arduino or other micro controllers you can use the 3.3 volt out to power the sensor or use the 5 volt power pin (vcc) to power the sensor. Either one will work.
Specification：
Working voltage range: DC 4.8-20V
Static current: <50uA
High level output: 3.3 V / low 0V
Trigger mode: L unrepeatable trigger /H repeated trigger (Default Repeating trigger)
Delay time: 0.5-200S (adjustable) can be produced range 0.1 seconds to a few minutes.
Blocking time: 2.5S (the default) can be produced range 0.1 seconds to tens of seconds.
Size: approx. 32mm*24mm circuit board
Induction angle: <100 degree cone angle
Working temperature: -15-+70 degrees
Induction of lens size: diameter: 23mm (default)
Note:
Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the photo and the actual item could be slightly different.
Package Included:
1pc New HC-SR501 Infrared PIR Motion Sensor Module
Payment:
-We Only accept Paypal payment. *We are unable to ship to PO Boxes or APO/FPO addresses
-International Buyers-Please Note:
a)Import dutiesm taxes and charges are not included in the item price or shipping charges .These charges are the buyer's responsibility.
b)Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Thank you!
Shipping:
Returns
:
-All our products have been checked and packaged in good condition. If the items you received is defective, please inform us within 7 days upon receipt of item, we will replace another new one or refund if stock out (shipping fee is not refundable)
-Buyers have to pay for the return cost and we pay the cost for reshipping.
-Please add a piece of paper written your eBay ID accompanied with the returned item so that we could process the replacement/refund accordingly.
Customer Services
:
Description:
It is great for microcontrollers such as arduino for funduino and many more including the rasberry pi!
It is a HC--SR501 Sensor Module with an operating voltage of 5v to 20v.
Operating voltage. It has a high value of 3.3 volts and a low of 0 (it is either on or off). It's delay time can be adjusted from 5 to 200seconds as well as the sensing range from 3meter to 7meters. The entire sensor with the board is 32mm by 24mm (standard pir motion sensor). The sensor either gives off a 3.3volt high value when motion is detected and then resumes or continues to give off a 0 voltage when no motion is detected. If you use an arduino or other micro controllers you can use the 3.3 volt out to power the sensor or use the 5 volt power pin (vcc) to power the sensor. Either one will work.
Specification：
Working voltage range: DC 4.8-20V
Static current: <50uA
High level output: 3.3 V / low 0V
Trigger mode: L unrepeatable trigger /H repeated trigger (Default Repeating trigger)
Delay time: 0.5-200S (adjustable) can be produced range 0.1 seconds to a few minutes.
Blocking time: 2.5S (the default) can be produced range 0.1 seconds to tens of seconds.
Size: approx. 32mm*24mm circuit board
Induction angle: <100 degree cone angle
Working temperature: -15-+70 degrees
Induction of lens size: diameter: 23mm (default)
Note:
Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the photo and the actual item could be slightly different.
Package Included:
1pc New HC-SR501 Infrared PIR Motion Sensor Module
PAYMENT
-We Only accept Paypal payment. *We are unable to ship to PO Boxes or APO/FPO addresses
-International Buyers-Please Note:
a)Import dutiesm taxes and charges are not included in the item price or shipping charges .These charges are the buyer's responsibility.
b)Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Thank you!
SHIPPING
Terms of Sale
-All our products have been checked and packaged in good condition. If the items you received is defective, please inform us within 7 days upon receipt of item, we will replace another new one or refund if stock out (shipping fee is not refundable)
-Buyers have to pay for the return cost and we pay the cost for reshipping.
-Please add a piece of paper written your eBay ID accompanied with the returned item so that we could process the replacement/refund accordingly.
ABOUT US
On May-03-21 at 10:56:06 PDT, seller added the following information: