HTP Argon CO2 Mig Tig Flow meter Regulator Welding Weld Flowmeter

Description

Note - You are purchasing from a seller that only sells welding supplies and equipment.  This is the standard flowmeter sold with the HTP Invertig 221 and the HTP Propulse 220 MTS - welders which cost over 00!
This
brand new HTP Flowmeter
which is perfect for
Mig and Tig Welding
. Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators. You can see from the diagram,  we do stock replacement parts for this flowmeter.  Remember, not all flowmeters are created equal- they may look the same on the outside, but the others do not have
HTP Quality on the inside
.
The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding
both steel and aluminum
. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our listing for those.
A very nice thing about this Flowmeter is the outlet will
fit both
the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting.
If you have a Miller, Lincoln, or Hobart  welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut.
Watch out for knock-off flowmeters that do not use the standard N-24 nut and NP-72 outlet nipples. These flowmeters use nylon washers to seal, where our fittings seal on the fitting and do not require any nylon washers!  Also, watch our for import flowmeters that do not have CGA-580 fittings - they will not connect to your tank!
If you need a gas hose to go with this flowmeter they are available for .95 in our store. The hose is e-bay item number 140781122107.
The gas hose will ship for no additional shipping charge, please request an invoice if the shipping is not correct.
***Save on shipping
by combining purchases of select MIG, TIG, or Plasma parts. However,
you must pay for all items with one combined payment for this shipping discount.
Separate payments for each item are not eligible for a shipping discount
.
Go to our store and see all the items we have for sale:
https://stores.ebay.com/welders4less
If you need any other hard to find welder parts that are not listed, send us an e-mail with a digital photo- we might have just what you need.
Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where all we sell are quality welding supplies at affordable prices. Please send us a message if you have any questions on our items.
12020-30